Nano Anti-Rust Film STD-4000

Product Description

STD-4000 Nano Anti-Rust Film uses nano molecules with high surface area as anti-rust materials. Nano particles have size effect, surface effect and strong interface interaction with polymers. They actively intercept harmful gas substances in the outer layer of the anti-rust film. At the same time, STD molecules are added to the inner layer of the product, which can volatilize into a confined space and form a protective barrier on the metal surface, so that the metal can be better protected.

Purpose

Including: rust prevention, protection, mildew prevention and other protection of ferrous metals and non-ferrous metals; anti-static protection of electronic components and circuit boards, shielding of electromagnetic and radio frequency interference, moisture-proof protection, etc.

Product Features

1. Excellent gas phase and contact anti-rust performance, good anti-rust effect, high cost performance;

2. Clean, harmless and non-toxic, environmentally friendly and safe. Passed SGS certification and complies with the requirements of the RoHS directive;

3. The workpieces protected by rust prevention can be unpacked and used immediately, eliminating the need for oiling, degreasing and cleaning, saving labor and time, improving work efficiency and saving costs;

4. Permanent anti-static protection;

5. Wide applicability. It can be used for everything from a single part to a whole device.

6. Good printability, which helps to improve the image and grade of the rust-proofed items.

7. Wide range of applicable ambient temperature: -35℃ to 80℃

8. Long protection period: up to 10-15 years

How to use

1. Users or staff must wear gloves, and it is strictly forbidden for staff to directly touch the workpiece with their hands (gloves should be replaced in time after being dirty);

2. Before packaging the workpiece, it must be ensured that there is no rust and moisture residue. For products that are washed and dried in the early stage, they need to be packaged after cooling. The workpiece cannot

have direct contact with any wood or acidic material;

3. It is best to use a closed packaging, which can effectively prevent moisture from corroding the workpiece and improve the anti-rust effect;

4. To achieve the best anti-rust effect, it is recommended to test whether the STD product is suitable for the workpiece to be packaged before use;

5. The anti-rust film continues to volatilize a small amount of anti-rust substances to provide anti-rust protection for the metal surface in direct contact. The distance between the anti-rust film and the metal depends on the packaging volume and the time required for the final formation of the anti-rust protective layer. Generally, it is 10-30 cm.

Packaging and storage

According to customer requirements, it can provide: sheets, rolls, flat bags, three-dimensional bags, plastic covers, etc.;

Thickness: 100-200μm