tel
+86-21-6420 0566
MT-600B Precision Environmentally Friendly Cleaning Agent is mainly an environmentally friendly degradable cleaning agent compounded with biodegradable agents, permeating and diffusing agents, and cleaning aids. It does not contain controlled substances such as heavy metals, phosphorus, and nitrites.
Purpose
It is used to clean the surface of non-ferrous metal parts such as ferrous metals, stainless steel, copper, aluminum, magnesium, zinc and its alloys, including motor oil, grinding oil, cutting fluid, anti-rust oil, dust and other pollutants.
Field of use
Valve manufacturing industry:
degreasing of cutting fluid during valve production and processing;
automobile manufacturing industry:
gearbox gears, engine parts through-type cleaning, engine housing ultrasonic cleaning, degreasing and cleaning during gear processing;
power tool industry: degreasing and cleaning of equipment and parts;
seamless steel pipes: degreasing and cleaning after cold rolling;
metal products: removal of cutting fluid, oil stains, etc.
Air conditioning manufacturing: cleaning of equipment pipelines after production (later maintenance), efficient decontamination, no residue;
engineering machinery: equipment surface cleaning, degreasing and cleaning involved in the production process;
general factory cleaning: degreasing and cleaning of equipment surface; cleaning of glass floors in factories, etc.
Main performance
1. Non-corrosive
2. Provide short-term rust prevention for cleaning parts
3. Clean and degrease all washable surfaces
4. Can remove tough, deposited grease, oil, dirt, etc.
5. Meet various aircraft test specifications
6. Super concentrated configuration, excellent grease decomposition ability and clean flushing formula
7. Economical and efficient.
Main technical indicators
| Product Name/Model | Precision environmentally friendly cleaning agent/VCI-600B |
| Outlook | Colorless |
| Density( g/ cm3) | 1.02±0.05 |
| Viscosity（@40℃mPa.s） | 0.98 |
| Material compatibility test | No effect on steel, copper, aluminum, stainless steel, ceramics, plastics, glass, etc. |
| PH value( original liquid) | 7.0～10.0（5% concentration) |
| Poisonous and harmful check | No irritation reaction |
| Biodegradation |
Instructions for use
1. Before using this product, you should read the product manual in detail and use it under the guidance of professionals. The cleaning methods can be spraying, hot soaking, ultrasonic cleaning, manual wiping, etc.
2. When using, the concentration of the cleaning solution should be adjusted according to the severity of the oil stain. In order to achieve the cleaning effect, the original liquid is generally mixed with water to make a cleaning solution with a concentration of 5~10%. After heating to 40℃ and spray cleaning or ultrasonic cleaning for 3~10 minutes, rinse with clean water and then dry or directly dry according to the cleaning requirements of the workpiece. Increasing the concentration of the cleaning solution can improve the cleaning ability. The concentration of the cleaning agent is relatively higher when manually wiping and cleaning.
3. When the oil stain is particularly heavy or encounters high-melting-point lipids, some of the sludge should be shoveled away manually or mechanically before cleaning.
Precautions
1. Adjust the concentration of the cleaning solution according to the severity of the oil stain. The subsequent workpiece processing procedures after cleaning will be determined according to the requirements of the surface cleanliness of the workpiece.
2. Remove the floating oil on the surface of the tank liquid in time to avoid secondary pollution.
3. 1%~3% of cleaning agent should be added regularly every day. If the cleaning capacity cannot reach the original level after replenishment, it can be discarded and replaced with new liquid.
4. Do not let this product come into contact with eyes. If it splashes into eyes accidentally, you can lift the eyelids and rinse with running water or saline; do not swallow this product. If swallowed accidentally, do not induce vomiting, keep resting, and seek medical care in time.
5. To prevent excessive skin degreasing, please wear chemical-resistant gloves during operation.
Wastewater treatment
No impact on the environment, the wastewater after cleaning can be directly discharged into industrial pipelines after treatment.
Packaging and storage
Packaging: 20L/200L
Storage: Store sealed in a cool, dry and ventilated place, with a shelf life of 2 years.